Short Lead Time for Graphite Mold - UHP Graphite electrode – Yidong
Short Description:
Short Lead Time for Graphite Mold - UHP Graphite electrode – Yidong Detail:
Description
Ultra-high-power graphite electrodes are made of high-quality needle coke as the main raw material, and are made by forming, roasting, impregnating, graphitizing and mechanical processing. They are widely used in electric arc furnaces as conductive materials.
Specification
The physical and chemical indexes of Ultra-high power graphite electrodes and nipples refer to YB/T 4090-2015
The instructions on graphite electrode
1.Electrodes shoulds be stored in a clean,dry place,shock and collision avoidances.It should be dried befor use.
2.When connecting the nipples,clean the hole with compressed air,then screw the nipples into it carfully without damaging the theads.
3.Befor the electrode tip by the compressed air when the two electrodes are 20-30mm away.
4.When the electrodes are connected by the wrenches,it should be fully tightened to the specified lacation that the gap between the two electrodes is less then 0.005mm.
5.To avoid the electrode breakage,please keep away from the instruction material blocks.
6.To avoid the electrode breakage,place the aniseed block on the lower part and set the small block on the upper part.
|
Project |
Nominal diameter /mm |
||||
|
300~400 |
450~500 |
550~650 |
700~800 |
||
|
Resistivity /μΩ·m ≤ |
Electrode |
6.2 |
6.3 |
6.0 |
5.8 |
|
Nipple |
5.3 |
5.3 |
4.5 |
4.3 |
|
|
Flexural Strength /MPa ≥ |
Electrode |
10.5 |
10.5 |
10.0 |
10.0 |
|
Nipple |
20.0 |
20.0 |
22.0 |
23.0 |
|
|
Elastic Modulus /GPa ≤ |
Electrode |
14.0 |
14.0 |
14.0 |
14.0 |
|
Nipple |
20.0 |
20.0 |
22.0 |
22.0 |
|
|
Bulk Density /(g/cm3) ≥ |
Electrode |
1.67 |
1.66 |
1.66 |
1.68 |
|
Nipple |
1.74 |
1.75 |
1.78 |
1.78 |
|
|
Thermal expansion coefficient /(10-6/℃) ≤ （room temperature~600℃） |
Electrode |
1.5 |
1.5 |
1.5 |
1.5 |
|
Nipple |
1.4 |
1.4 |
1.3 |
1.3 |
|
|
Ash /％ ≤ |
0.5 |
0.5 |
0.5 |
0.5 |
|
|
Note: Ash is divided into reference index. |
|||||
Product detail pictures:
Related Product Guide:
Dedicated to strict high-quality management and considerate purchaser support, our experienced employees members are usually available to discuss your specifications and be certain full shopper satisfaction for Short Lead Time for Graphite Mold - UHP Graphite electrode – Yidong, The product will supply to all over the world, such as: America, Bahamas, Rwanda, To create more creative products, maintain high-quality products and update not only our products but ourselves so as to keep us ahead of the world, and the last but most vital one: to make every client satisfied with everything we offer and to grow stronger together. To be the real winner, starts here!
By Isabel from Marseille - 2017.09.09 10:18
The sales manager is very patient, we communicated about three days before we decided to cooperate, finally, we are very satisfied with this cooperation!
By Hedda from Nicaragua - 2018.09.23 18:44
