Original Factory 700mm Uhp Graphite Electrode For Arc Furnace - UHP Graphite electrode – Yidong
Short Description:
Original Factory 700mm Uhp Graphite Electrode For Arc Furnace - UHP Graphite electrode – Yidong Detail:
Description
Ultra-high-power graphite electrodes are made of high-quality needle coke as the main raw material, and are made by forming, roasting, impregnating, graphitizing and mechanical processing. They are widely used in electric arc furnaces as conductive materials.
Specification
The physical and chemical indexes of Ultra-high power graphite electrodes and nipples refer to YB/T 4090-2015
The instructions on graphite electrode
1.Electrodes shoulds be stored in a clean,dry place,shock and collision avoidances.It should be dried befor use.
2.When connecting the nipples,clean the hole with compressed air,then screw the nipples into it carfully without damaging the theads.
3.Befor the electrode tip by the compressed air when the two electrodes are 20-30mm away.
4.When the electrodes are connected by the wrenches,it should be fully tightened to the specified lacation that the gap between the two electrodes is less then 0.005mm.
5.To avoid the electrode breakage,please keep away from the instruction material blocks.
6.To avoid the electrode breakage,place the aniseed block on the lower part and set the small block on the upper part.
|
Project |
Nominal diameter /mm |
||||
|
300~400 |
450~500 |
550~650 |
700~800 |
||
|
Resistivity /μΩ·m ≤ |
Electrode |
6.2 |
6.3 |
6.0 |
5.8 |
|
Nipple |
5.3 |
5.3 |
4.5 |
4.3 |
|
|
Flexural Strength /MPa ≥ |
Electrode |
10.5 |
10.5 |
10.0 |
10.0 |
|
Nipple |
20.0 |
20.0 |
22.0 |
23.0 |
|
|
Elastic Modulus /GPa ≤ |
Electrode |
14.0 |
14.0 |
14.0 |
14.0 |
|
Nipple |
20.0 |
20.0 |
22.0 |
22.0 |
|
|
Bulk Density /(g/cm3) ≥ |
Electrode |
1.67 |
1.66 |
1.66 |
1.68 |
|
Nipple |
1.74 |
1.75 |
1.78 |
1.78 |
|
|
Thermal expansion coefficient /(10-6/℃) ≤ （room temperature~600℃） |
Electrode |
1.5 |
1.5 |
1.5 |
1.5 |
|
Nipple |
1.4 |
1.4 |
1.3 |
1.3 |
|
|
Ash /％ ≤ |
0.5 |
0.5 |
0.5 |
0.5 |
|
|
Note: Ash is divided into reference index. |
|||||
Product detail pictures:
Related Product Guide:
Our enterprise since its inception, often regards solution excellent as enterprise life, continually strengthen output technology, enhance product high quality and continually strengthen organization total high-quality administration, in strict accordance using the national standard ISO 9001:2000 for Original Factory 700mm Uhp Graphite Electrode For Arc Furnace - UHP Graphite electrode – Yidong, The product will supply to all over the world, such as: Mombasa, Cairo, Chile, Our company always concentrate on the development of the international market. We now have a lot of customers in Russia , European countries, the USA, the Middle East countries and Africa countries. We always follow that quality is foundation while service is guarantee to meet all customers.
By Carey from Belgium - 2018.10.01 14:14
We have been cooperated with this company for many years, the company always ensure timely delivery ,good quality and correct number, we are good partners.
By Steven from Morocco - 2018.12.28 15:18
