Low MOQ for Steel Making Uhp Graphite Electrodes - UHP Graphite electrode – Yidong
Short Description:
Low MOQ for Steel Making Uhp Graphite Electrodes - UHP Graphite electrode – Yidong Detail:
Description
Ultra-high-power graphite electrodes are made of high-quality needle coke as the main raw material, and are made by forming, roasting, impregnating, graphitizing and mechanical processing. They are widely used in electric arc furnaces as conductive materials.
Specification
The physical and chemical indexes of Ultra-high power graphite electrodes and nipples refer to YB/T 4090-2015
The instructions on graphite electrode
1.Electrodes shoulds be stored in a clean,dry place,shock and collision avoidances.It should be dried befor use.
2.When connecting the nipples,clean the hole with compressed air,then screw the nipples into it carfully without damaging the theads.
3.Befor the electrode tip by the compressed air when the two electrodes are 20-30mm away.
4.When the electrodes are connected by the wrenches,it should be fully tightened to the specified lacation that the gap between the two electrodes is less then 0.005mm.
5.To avoid the electrode breakage,please keep away from the instruction material blocks.
6.To avoid the electrode breakage,place the aniseed block on the lower part and set the small block on the upper part.
|
Project |
Nominal diameter /mm |
||||
|
300~400 |
450~500 |
550~650 |
700~800 |
||
|
Resistivity /μΩ·m ≤ |
Electrode |
6.2 |
6.3 |
6.0 |
5.8 |
|
Nipple |
5.3 |
5.3 |
4.5 |
4.3 |
|
|
Flexural Strength /MPa ≥ |
Electrode |
10.5 |
10.5 |
10.0 |
10.0 |
|
Nipple |
20.0 |
20.0 |
22.0 |
23.0 |
|
|
Elastic Modulus /GPa ≤ |
Electrode |
14.0 |
14.0 |
14.0 |
14.0 |
|
Nipple |
20.0 |
20.0 |
22.0 |
22.0 |
|
|
Bulk Density /(g/cm3) ≥ |
Electrode |
1.67 |
1.66 |
1.66 |
1.68 |
|
Nipple |
1.74 |
1.75 |
1.78 |
1.78 |
|
|
Thermal expansion coefficient /(10-6/℃) ≤ （room temperature~600℃） |
Electrode |
1.5 |
1.5 |
1.5 |
1.5 |
|
Nipple |
1.4 |
1.4 |
1.3 |
1.3 |
|
|
Ash /％ ≤ |
0.5 |
0.5 |
0.5 |
0.5 |
|
|
Note: Ash is divided into reference index. |
|||||
Product detail pictures:
Related Product Guide:
Our primary objective is always to offer our clients a serious and responsible small business relationship, offering personalized attention to all of them for Low MOQ for Steel Making Uhp Graphite Electrodes - UHP Graphite electrode – Yidong, The product will supply to all over the world, such as: Myanmar, Surabaya, Sweden, We aspire to meet the demands of our customers globally. Our range of merchandise and services is continuously expanding to meet customers' requirements. We welcome new and old customers from all walks of life to contact us for future business relationships and achieving mutual success!
By Audrey from Slovakia - 2018.06.03 10:17
The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!
By Nainesh Mehta from Singapore - 2018.02.21 12:14
